Remove case from rig. Remove (4) screws that holds antenna tuner in place. Next slide antenna tuner out to get to the coax

connections. Remove the in coax attached to antenna tunerfrom FO connector on filter unit (X51-1340-00). Remove coax from out

connector on antenna tuner and install in FO CONNECTOR ON FILTER UNIT. Unplug and remove switch unit (X41-1610-00 N-14) from

rig.

Remove short wire from antenna connector to PC BOARD. Cut coax on the in connector of antenna tuner in half and connect cut end

to switch unit PC BOARD Where short antenna wire was removed and shield to ground. Solder other half of coax to antenna connector

and shield to ground, and plug other end into out conector of antenna tuner. Your still have control of antenna tuner with auto and