Lost data in VX-1 CPU for Squelch & S meter functions

Reprogramming Procedure:
Note: ** in procedure below resents any number sequence   
  1. Press & hold the VOL + FW + MON buttons down together and power up the radio. The Display should now show HSSQ03 (note: the important 3 is the small 3 at the top of the display. If anything but 3 appears at the top of the display, press the BAND button until the 3 appears)
  2. Press the UP button to display HASQ**
  3. Turn the dial until the display shows HASQ08
  4. Press the UP button to display THSQ**
  5. Turn the dial until the display shows THSQ4F
  6. Press the UP button to display TISQ**
  7. Turn the dial until the display shows TISQ2F
  8. Press the UP button 2 times to display S1LV**
  9. Turn the dial until the display shows S1LV34
  10. Press the UP button to display S9LV**
  11. Turn the dial until the display shows S9LVA3
  12. Press the UP button to display HSSQ03
  13. Press the BAND button 3 times until the display shows HSSQ06 (again note: this is the small 6 at the top of the display)
  14. Press the UP button to display HASQ**
  15. Turn the dial until the display shows HASQ08
  16. Press the UP button to display THSQ**
  17. Turn the dial until the display shows THSQ4D
  18. Press the UP button to display TISQ**
  19. Turn the dial until the display shows TISQ30
  20. Press the UP button 2 times to display S1LV**
  21. Turn the dial until the display shows S1LV27
  22. Press the UP button to display S9LV**
  23. Turn the dial until the display shows S9LV96
  24. Press the FW button for 0.5 seconds to store these settings into memory. The radio will return to normal mode.
The reprogramming procedure is now complete.

GW1NGL NA7KR Kevin Roberts Ham Radio

Page last updated on 09/10/2012 by Kevin Roberts NA7KR a colection of Ham Radio and Electronic Information