Subject: PK-232 MOD (RF LOCK-UP)
Are you having trouble with your PK-232 Locking up (not returning to receive
mode) when a high RF signal is present? If so AEA says to add a .01 MFD
Capacitor across D30.
D30 is located in lower right hand corner of Main Board, parts pictorial page
I-1 of operating manual, just to the left of JP2 and JP3 beside SW-2.
I hope this helps, it stopped my problems ……
73
Rick N7KQB @KE7PV
GW1NGL NA7KR Kevin Roberts Ham Radio
Page last updated on 09/10/2012 by Kevin Roberts NA7KR a colection of Ham Radio and Electronic Information
Are you having trouble with your PK-232 Locking up (not returning to receive
mode) when a high RF signal is present? If so AEA says to add a .01 MFD
Capacitor across D30.
D30 is located in lower right hand corner of Main Board, parts pictorial page
I-1 of operating manual, just to the left of JP2 and JP3 beside SW-2.
I hope this helps, it stopped my problems ……
73
Rick N7KQB @KE7PV
GW1NGL NA7KR Kevin Roberts Ham Radio
Page last updated on 09/10/2012 by Kevin Roberts NA7KR a colection of Ham Radio and Electronic Information